Lasers and LEDs: Spinning Cube Project at Maker Faire Bay Area

Adafruit Industries

Player FM - Internet Radio Done Right

72 subscribers

Đã thêm cách đây chín năm

Nội dung được cung cấp bởi Adafruit Industries. Tất cả nội dung podcast bao gồm các tập, đồ họa và mô tả podcast đều được Adafruit Industries hoặc đối tác nền tảng podcast của họ tải lên và cung cấp trực tiếp. Nếu bạn cho rằng ai đó đang sử dụng tác phẩm có bản quyền của bạn mà không có sự cho phép của bạn, bạn có thể làm theo quy trình được nêu ở đây https://vi.player.fm/legal.

On the Bus with Troy Vollhoffer

1
From Backroom Bars to Broadway with Dustin Lynch 36:27

cách đây 15 ngày trước36:27

Nghe Sau

Danh sách

Thích

Đã thích

36:27

Not many artists actually hail from Tennessee, but the scenic valleys and rolling hills of The Volunteer State are part of Dustin Lynch’s DNA. In this episode of On the Bus, Country Thunder CEO Troy Vollhoffer sits down with Dustin to discuss his journey from playing fraternity parties and weddings across the southeast to being the first country artist with a club residency at the Wynn in Las Vegas. Plus, stick around for our new segment, Thunder Strike, where Troy features upcoming festival performer Riley Green’s hit song “Damn Good Day to Leave” to give you a taste of what’s to come at Country Thunder in 2025.…

cách đây khoảng một năm trước 1:59

MP4•Trang chủ episode

We bumped into Daniel from Lasers and LEDs (instagram.com/lasersandleds) at Maker Faire Bay Area 2024. Check out his awesome project! This thing was really amazing in person. The cube spins at variable rates and creates a stunning visual optical illusion.. it was unlike anything I'd seen before, and it was such a delight getting to meet Daniel and see his work. Visit the Adafruit shop online - http://www.adafruit.com Erin St Blaine - www.erinstblaine.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

4828 tập

#3D Printing #Adafruit Industries #Video #Podcasting Education

Lasers and LEDs: Spinning Cube Project at Maker Faire Bay Area

Adafruit Industries

72 subscribers

published cách đây khoảng một năm trước

Chia sẻ

MP4•Trang chủ episode

4828 tập

#3D Printing #Adafruit Industries #Video #Podcasting Education

Alle episoder

1
3D Hangouts – Asteroid Tracker, Camera Slider and REPO robot 1:03:48

cách đây 22 hours trước1:03:48

1:03:48

This week @adafruit we’re prototyping new projects. First up from Pedro, a new round display project that tracks asteroids using NASA APIs. Noe is back working on the camera slider. Featuring made projects from the community. Timelapse video this week features the REPO robot by DanishFish. 1.28in Round Display https://www.adafruit.com/product/6178 QT Py ESP32 S3 https://www.adafruit.com/product/5700 EYESPI BFF https://www.adafruit.com/product/5772 TMC2209 Driver https://www.adafruit.com/product/6121 KBRP2040 Board https://www.adafruit.com/product/5302 Timelapse Tuesday R.E.P.O Robot By DanishFish https://youtu.be/0MsvqpWu7H8 https://makerworld.com/en/models/1192726-repo-robot-posable-and-disposable…

1
ASK AN ENGINEER 4/2/2025 LIVE! 45:16

cách đây 1 day trước45:16

45:16

ASK AN ENGINEER 4/2/2025 LIVE! Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ ----------------------------------------- #ask #engineering #art…

1
SHOW and TELL 4/2/2025 22:22

cách đây 1 day trước22:22

22:22

SHOW and TELL 4/2/2025

1
JP’s Product Pick of the Week 4/1/25 RECAP Sparkle Motion Mini WLED-friendly ESP32 LED Driver 1:00

cách đây 1 day trước1:00

1:00

#newproducts JP’s Product Pick of the Week 4/1/25 Sparkle Motion Mini WLED-friendly ESP32 NeoPixel LED Driver https://www.adafruit.com/product/6160 Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------…

1
JP’s Product Pick of the Week 4/1/25 35:48

cách đây 2 ngày trước35:48

35:48

#newproducts JP’s Product Pick of the Week 4/1/25 Sparkle Motion Mini WLED-friendly ESP32 NeoPixel LED Driver https://www.adafruit.com/product/6160 Deep discount during livestream Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------…

1
Kwabena Agyeman from OpenMV! 16:36

cách đây 2 ngày trước16:36

16:36

Interview with Kwabena Agyeman from OpenMV https://openmv.io/ Embed AI into anything, anywhere, running on batteries for years with the OpenMV N6 and AE3. https://www.kickstarter.com/projects/openmv/openmv-n6-and-ae3-low-power-python-programmable-ai-cameras We are a backer! Website: https://openmv.io LinkedIn: https://www.linkedin.com/company/openmv-llc/ YouTube: https://www.youtube.com/@OpenMVLLC X: https://x.com/openmvcam BlueSky: https://bsky.app/profile/openmv.io #openmv #kickstarter #opensource…

1
R.E.P.O Robot 1:00

cách đây 3 ngày trước1:00

1:00

Every week we'll 3D print designs from the community and showcase slicer settings, use cases and of course, Time-lapses! This Week: R.E.P.O Robot By DanishFish https://makerworld.com/en/models/1192726-repo-robot-posable-and-disposable Bambu X1C Red White Black PLA 2hr 30mins X:30 Y:30 Z:25mm .2mm layer / .4mm Nozzle 6% Infill / 1mm Retraction 200C / 60C 48g 230mm/s ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Shop for parts to build your own DIY projects http://adafru.it/3dprinting 3D Printing Projects Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOWD2dJNRIN46uhMCWvNOlbG 3D Hangout Show Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVgpmWevin2slopw_A3-A8Y Layer by Layer CAD Tutorials Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVsMp6nKnpjsXSQ45nxfORb Timelapse Tuesday Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVagy3CktXsAAs4b153xpp_ Connect with Noe and Pedro on Social Media: Noe's Twitter / Instagram: @ecken Pedro's Twitter / Instagram: @videopixil ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Subscribe to Adafruit on YouTube: http://adafru.it/subscribe Adafruit Monthly Deals & FREE Specials https://www.adafruit.com/free?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell Watch our latest project videos: http://adafru.it/latest?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting 3DThursday Posts: https://blog.adafruit.com/category/3d-printing?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting New tutorials on the Adafruit Learning System: http://learn.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Music by Dan Q https://soundcloud.com/adafruit -----------------------------------------…

1
CircuitPython Weekly Meeting for March 31, 2025 27:27

cách đây 3 ngày trước27:27

27:27

Visit the Adafruit shop online - http://www.adafruit.com Notes document is available here, with timecodes: https://github.com/adafruit/adafruit-circuitpython-weekly-meeting/blob/main/2025/2025-03-31.md 0:00 Housekeeping 3:34 Community News 7:10 State of CircuitPython, Libraries & Blinka 17:04 Hug Reports 20:12 Status Updates 26:00 In the Weeds 26:22 Wrap-up Join here for the chat all week: http://adafru.it/discord The CircuitPython Weekly normally is held at 2pm US ET/11am us PT on Mondays. Check the #circuitpython-dev channel on Discord for notices of change in time and links to past meetings. Meeting times are also available in iCal format using the following link: https://raw.githubusercontent.com/adafruit/adafruit-circuitpython-weekly-meeting/master/meeting.ical or view it in your browser: https://open-web-calendar.herokuapp.com/calendar.html?url=https://raw.githubusercontent.com/adafruit/adafruit-circuitpython-weekly-meeting/master/meeting.ical CircuitPython development is sponsored by Adafruit. Please support them by purchasing hardware from https://adafruit.com. Reminders: Podcast available on most services. Let us know if we’re missing some. ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------…

1
Desk of Ladyada - Slow Sunday Pokes 28:58

cách đây 4 ngày trước28:58

28:58

This week was slow for hardware development—we were getting over being under the weather. But we did poke a little at a PCM5122 breakout board (https://www.digikey.com/short/fnf9t0b1). This chip can do software or hardware control of I2S signals and is preferred by folks who want something a little nicer than the PCM5102 (https://www.adafruit.com/product/6250). We also wrapped up our design for the 8x solenoid driver board—the biggest update is adding indicator LEDs. Lastly, we got our prototypes for the "USB CC Fixer" adapter, which we mostly made so we could charge a really annoying baby monitor, but probably other folks will want to buy it, too. ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------…

1
The Great Search - 5W+ Class D I2S Amp 11:16

cách đây 4 ngày trước11:16

11:16

We've been putting a lot of I2S DACs in the shop, like the PCM5102 (https://www.digikey.com/short/fnf9t0b1) and TLV320DAC3100 (https://www.digikey.com/short/wj2d8w2h), and working on more like the PCM5122 (https://www.digikey.com/short/fnf9t0b1). What we'd really like is an I2S speaker amplifier that is preferably stereo and can do more than 5W—e.g., a cross between the MAX98357 (https://www.adafruit.com/product/3006) and MAX9744 (https://www.adafruit.com/product/1752). Let's see what we can find! See the chosen part on DigiKey https://www.digikey.com/short/1v038d8z ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------…

1
Desk of Ladyada - Slow Sunday Pokes 28:51

cách đây 4 ngày trước28:51

28:51

Testing a PCM5122 I2S DAC, adding LEDs to the 8x solenoid driver, and prototyping a "USB CC Fixer" to charge a tricky baby monitor. Also we're on the hunt for a stereo I2S amp with 5W+ output.

1
Deep Dive w/Scott: Emoji Fonts in CircuitPython! 1:59:01

cách đây 6 ngày trước1:59:01

1:59:01

Join Scott as he finishes up work on LVGL font on disk support and answers any questions folks have. He's been trying Windsurf AI assistant for coding too! Visit the Adafruit shop online - http://www.adafruit.com Thanks to dcd for timecodes: 0:00 Getting started 1:11 Hello everyone - welcome to Deep Dive 2:15 Fruit Jam will be available in the future 2:40 Thanks to Tim / FoamyGuy for filling the past few weeks 3:00 Scott will not be doing Deep Dives in May 4:40 Status update: Added third drive to CP 7:00 NerdSnipping - supporting emojis 8:37 unifoundry.com emojis 9:14 added lvmfont to the Adafruit_CircuitPython_BitMap_Font library 10:05 used Claude code to generate file parsing code (it checks for error message from compiler) 12:00 Demo of what is working so far - using new capture card - live output from Fruit Jam 13:16 Windsurf - (a fork of vscode) 14:13 emojipedia.org 15:01 partypopper, parting face, and other emojis 15:40 fonts loaded off the "disk" - not using all the RAM 17:13 NERD FONTS nerdfonts.com - fetching rain cloud icon 21:26 Status Bar emojis vs. terminal emojis 22:40 meta-period to get to emoji selector 23:09 emojipedia / wire keyboard / unicode plains 24:30 Circuitpython-font-generator (created by AI Friend) 26:53 Unicode Character Ranges at jrgraphix.net 27:18 using Cascade AI to help generate code - using Windsurf for code review 30:26 Might look at RooCode in the future 37:08 eject the drive and restart 39:07 Look at Claude code 43:22 vscode issues - the constant pop-ups.... 48:55 check out the Japanese fonts - ( see tio showing the fonts ) 54:45 return to windsurf and add some debug prints 1:00:27 Disable some of the serial mirroring 1:11:23 More debugging required :-) 1:27:06 fix might be to use the counts...54:45 return to windsurf and add some debug prints 1:00:27 Disable some of the serial mirroring 1:11:23 More debugging required :-) 1:27:06 fix might be to use the counts...54:45 return to windsurf and add some debug prints 1:00:27 Disable some of the serial mirroring 1:11:23 More debugging required :-) 1:27:06 fix might be to use the counts...54:45 return to windsurf and add some debug prints 1:00:27 Disable some of the serial mirroring 1:11:23 More debugging required :-) 1:27:06 fix might be to use the counts...54:45 return to windsurf and add some debug prints 1:00:27 Disable some of the serial mirroring 1:11:23 More debugging required :-) 1:27:06 fix might be to use the counts... 1:29:46 add ascii font also to a few languages 1:33:10 that fixed it - ascii in title bar and terminal 1:34:44 update settings.toml ( selecting fonts? ) 1:38:00 staging changes and rebuild 1:42:35 now we have emojis 1:45:10 how to get cascade to remember context 1:48:50 edit ing .windsurfrules 1:49:29 claude created CLAUDE.md, windsurf didn't 1:51:38 stage more changes and git commit --amend 1:53:41 the new HDMI capture card was XR1 lite from EVGA ( was using the adafruit card ) 1:56:46 wrap-up 1:58:39 artifacts in the circuitpython-font-generator ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------…

1
John Park's CircuitPython Parsec: USB Gamepad Configuration 4:46

cách đây 6 ngày trước4:46

4:46

#circuitpythonparsec Here's a demo of Feather RP2040 USB Host running a USB gamepad to read data and remap button presses inside of CircuitPython. https://learn.adafruit.com/adafruit-feather-rp2040-with-usb-type-a-host/usb-host-read-data https://github.com/jedgarpark/parsec/blob/main/2025-03-25/ https://www.adafruit.com/product/5723 Learn about CircuitPython: https://circuitpython.org Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------…

1
John Park's Workshop Live 3/27/25 54:00

cách đây 7 ngày trước54:00

54:00

John Park's Workshop Live 3/27/25 Larsio Paint Music CircuitPython Parsec JPPPoW recap Projects and more! Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------…

1
New Product 3/26/25 Feat. @Adafruit Adafruit TLV320DAC3100 - I2S DAC with Headphone and Speaker Out 7:27

cách đây 7 ngày trước7:27

7:27

USB Wired Mouse - Two Buttons plus Wheel (0:05) https://www.adafruit.com/product/2025 Raspberry Pi PoE+ Injector (0:32) https://www.adafruit.com/product/6281 Pimoroni Plasma 2350 W - Wireless RP2350 LED Driver - PIM729 (1:40) https://www.adafruit.com/product/6246 Pimoroni Inky Frame 7.3" - Pico 2 W Aboard - PIM737 (2:54) https://www.adafruit.com/product/6247 Adafruit ESP32-S3 Reverse TFT with w.FL Antenna (4:30) https://www.adafruit.com/product/6303 Adafruit TLV320DAC3100 - I2S DAC with Headphone and Speaker Out (5:32) https://www.adafruit.com/product/6309 Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- New nEw NEWs New Products, News, and more: https://www.adafruit.com/newsletter #newnewnew Shop for all of the newest Adafruit products: http://adafru.it/new Visit the Adafruit shop online - http://www.adafruit.com Adafruit on Instagram: https://www.instagram.com/adafruit LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------…

Chào mừng bạn đến với Player FM!

Player FM đang quét trang web để tìm các podcast chất lượng cao cho bạn thưởng thức ngay bây giờ. Đây là ứng dụng podcast tốt nhất và hoạt động trên Android, iPhone và web. Đăng ký để đồng bộ các theo dõi trên tất cả thiết bị.