CNC Routing like a Pro with Josh Martinez of X-Edge Products

Slightly Serious Sign Podcast

Ep 22: Tyler and Domingo sit down with Josh Martinez of X-Edge Products to talk about how to route efficiently with the right bits and material.
X-EDGE CNC Router Bits in Action
https://youtu.be/jdzyiMhuUFE
X-EDGE Matrix Mat Overview
https://youtu.be/qwMsjWNl64U
X-EDGE Torque Wrench and Station Kit for CNC Routers Overview
https://youtu.be/bG1EKxOrQuA
The Slightly Serious Sign Podcast is now the #1 Most Fact Checked Podcast in the United States.

Voted #1 by Signman (standing on a van on top of 18 pallets changing a lightbulb over a movie theater sign)
https://www.wensco.com/company/slightly-serious-sign-podcast
616.785.3333
The views, thoughts, and opinions expressed are the speaker’s own and do not represent the views, thoughts, and opinions of Wensco Sign Supply. The material and information presented here is for general information purposes only. The "Wensco Sign Supply" name and all forms and abbreviations are the property of its owner and its use does not imply endorsement of or opposition to any specific organization, product, or service. Things to note on the statement. Wensco owns all rights to video or audio for Slightly Serious Sign broadcast and cannot be used without the written authorization from Wensco Administration.
The Slightly Serious Sign Podcast is hosted by Mike Hull, Tyler Hull, and Domingo Tobar and produced, recorded, shot, and edited by Rick Villanueva with sponsorship from Wensco Sign Supply.